FQEWOGPV"PQ0" TGX0PQ" RCIG
UVCPFCTF"
PCOG"
"
3413;
80"KPUVTWEVKQPU
6.1 Outline
Only the instruction register (IR) and data register (DR) of the VFD controller can be controlled by the
user's MPU. Before starting the internal operation of the controller, control information is temporarily
stored into these registers to allow interfacing with various MPUs, which operate at different speeds, or
various peripheral control devices. The internal operation of the controller is determined by signals sent
from the MPU. These signals, which include register selection signal (RS), read/write signal (R/W), and
the data bus (DB0 to DB7), make up the controller instructions (See Table-13). There are four categories
of instructions that:
ェ
designate controller functions, such as display format, data length, ect.
ェ
Set internal RAM addresses
ェ
Perform data transfer with internal RAM
ェ
Perform miscellaneous functions
Normally instructions that perform data transfer with interval RAM are used the most.
However, auto-increment by 1 (or auto-decrement by 1) of internal RAM addresses after each data write
can lighten the program load of the MPU. Since the display shift instruction can perform concurrently with
display data write, the user can minimize system development time with maximum programming
efficiency0"
"
When an instruction is being executed for internal operation, no instruction other than the busy
flag/address read instruction can be executed. Because the busy flag is set to 1 while an instruction is being
executed, check it to make sure it is 0 before sending another instruction from the MPU.
"
Note<"Be sure the controller is not in the busy state (BF=0) before sending an instruction from the MPU to the
nodule. If an instruction is sent without checking the busy flag, the time between the first instruction and
next instruction will take much longer than the instruction time itself.
Refer to Table-13 for the list of each instruction execution time.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
M0121LB-222LHAR2-I1
MODULE VF CHAR 1X21 14.5MM
M0216MD-162MDBR2-J
MODULE VF CHAR 2X16 9.22MM
M0216SD-162SDAR1
MODULE VF CHAR 2X16 4.34MM
M0216SD-162SDAR2-1
MODULE VF CHAR 2X16 5.34MM
M0216SD-162SDAR8
MODULE VF CHAR 2X16 5.34MM
M0220MD-202LDAR2
MODULE VF CHAR 2X20 10.5MM
M0220MD-202MDAR1-1
MODULE VF CHAR 2X20 8.95MM
M0220MD-202MDAR1-3
MODULE VF CHAR 2X20 8.95MM
相关代理商/技术参数
M0121LB-222LHAR2-I1
功能描述:MODULE VF CHAR 1X21 14.5MM RoHS:是 类别:光电元件 >> 显示器模块 - 真空荧光(VFD) 系列:- 产品变化通告:MO VPT Module Change 16/Aug/2010
2x20 Screen Board Change 10/Nov/2009 标准包装:1 系列:VK202-25 外形L x W x H:116.00mm x 37.00mm x 29.48mm 可视范围:89.75mm L x 11.50mm W 显示格式:20 x 2 显示器类型:字符 格式:5 x 7 点 电源电压:9 V ~ 35 V 字符尺寸:4.70mm H x 2.40mm W 点数:- 接口:串行 工作温度:-20°C ~ 70°C 相关产品:VFD-GREEN-202-ND - LCD ACCY VFD FILTER 20X2 GREENVFD-RED-202-ND - LCD ACCY VFD FILTER 20X2 REDVFD-GREY-202-ND - LCD ACCY VFD FILTER 20X2 GRAYVFD-BLUE-202-ND - LCD ACCY VFD FILTER 20X2 BLUE
M012437-00A
制造商:Teac 功能描述:1" HIGH BLACK BEZEL - Bulk
M012437-00B
制造商:Teac 功能描述:1" HIGH BLACK BEZEL - Bulk
M012450-00A
制造商:Teac 功能描述:SHUTTER;BLACK 制造商:Teac 功能描述:FLAP - Bulk
M0128-SS-20
制造商:RAF Electronic Hardware 功能描述:
M0132-SS-20
制造商:RAF Electronic Hardware 功能描述:
M0133-SS-0
制造商:RAF Electronic Hardware 功能描述:
M0145-SS
制造商:RAF Electronic Hardware 功能描述: